General Use Light Yellow - Hot Melt Glue Stick , Made In China
Hot Melt Glue Stick is design for general Use, especially for carton sealing, box sealing, wood edage sealing, ect. Which property is good adhesion, no stringing, and short setting time. It has a good market both at home and aborad.
|Name||Hot Melt Glue Stick|
|Size||11.3 x 275 mm|
|Suggested running temperature||170-180°C|
|Validity period||18 months|
|Storage environment||Clean and dry environment|
|Packing||25kg/bag, pack in poly bag|
Within two weeks after receiving 30%
Clean: please keep the equipment clean; clear the adhesive melting
box regularly. Control the temperature of the adhesive melting box
under 150 degrees when clearing it. Empty all remaining adhesive
before adding new adhesive. Turn off the machine when not using it.
Safety: Because of the high running temperature, please wear
protective clothes, eyeshade, and glove when working.
Other: This test result is given by our company test method and
equipment. Different test method may cause the result a little difference. So in order
not to cause unexpected loss, we suggest that you make a test
before using the product.
What are hot melt polyamide adhesives?
Hot melt polyamide adhesives are solid adhesives at room
temperature, contain absolutely no water and solvents, and are
mainly composed of thermoplastic resin. Generally speaking, hot
melt coaters, known as applicators, are used to melt hot melt
adhesives. Guns are used to apply these adhesives in their liquid
state to the adherend, which is then crimped, cooled, and adhered.
The time required to complete the adhering process is only the time
required to cool and solidify the adhesive, which makes it possible
to adhere objects to each other in a few seconds to a few minutes.
What can you tell me about the open time and setting time?
Hot melt adhesives melt under high temperatures. You have to apply
these adhesives to an object and adhere another object to it before
these adhesives cool and lose their adhesive properties. The open
time is the period of time from when the adhesive is applied to the
adherend to when the adhesive cools to the point that it loses its
adhesive properties. The open time is normally a length of time
from a few seconds to a few minutes and is determined on the basis
of the usage conditions, ambient environment, and hot melt adhesive
mixture. The setting time is the period of time until the hot melt
adhesive applied to the adherend cools, solidifies, and exhibits
its initial adhesive strength.